 directed audio 350d mono block, quick question.... |
 May 2, 2004 - 1:28 AM
|
 
|
 Enthusiast  Joined Jul 6, '03 From Long Beach, CA..."LBC" Currently Offline Reputation: 0 (0%)  |
mono amps means one chanel rite?....i have the amp above, i believe its made by viper audio. well anyways it has 2 channels to it and i was told i wasnt to bridge it because it bridges itself internally also said in the manual. so i running 2 12's (crossfire db's) one into each channel. i was wondering if i can run both into one channel and maybe get a lil more power. its rated at 200rms x 1 at 4 ohms and 300rms x 1 at 2 ohms. the subs are SVC at 4ohms. well thats it for now thanks!!
sang --------------------  |
 |
Replies
|
May 5, 2004 - 6:58 PM
|
|
|
Enthusiast Joined Mar 12, '04 From Norway Currently Offline Reputation: 0 (0%) |
2x 4Ohm woofers in parallel equals 2 Ohm
 So you are running each "output" at 4 ohm, but they are bridged internally to generate a 2 ohm channel. How much watt you are pushing all depends on how the manual describes the wattage. If the values gives are per output then you are running 4 ohm, meaning 300 watt. If the manual is refering to the load on the channel (2x 4 ohm in par. = 2 ohm) then you are pushing 600 watt .... |
Posts in this topic
LBCxGUY directed audio 350d mono block May 2, 2004 - 1:28 AM
LBCxGUY mono block help anybody?? May 3, 2004 - 11:10 PM phat94celi are you sure thats the amp you have? Because bein... May 4, 2004 - 5:16 PM shid I have a question VERY related to this too. I have... May 4, 2004 - 7:57 PM BEEFSTEW800 both of you are running your subs at 2 ohms. the 2... May 4, 2004 - 8:32 PM shid I'm not running at 2 ohms- I KNOW I'm not ... May 4, 2004 - 8:35 PM
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 18th, 2025 - 1:26 PM |