Jun 1, 2004 - 10:15 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 17, '03 From Bloomington, Indiana Currently Offline Reputation: 62 (98%) |
Hey everyone,
Here recently in my Celica it won't go into 1st or 3rd gears at times and I'll be sitting at a stop light and try to go into first and it will not go... the nly way to get it in is RAMM IT HARD or turn off the car put it in gear then restart. It also is grindin in reverse almost everytime i put it in. I'm tryin to avoid goin to the shop and gett screwed on princin for them to tell me it's nothin when i know it is. If you have any knowledge what so ever please help me out. Thanks!!! Dustin -------------------- ![]() |
![]() |
Jun 2, 2004 - 2:00 AM
|
|
|
Enthusiast ![]() ![]() Joined Jun 21, '03 From FRANKFORT,KENTUCKY Currently Offline Reputation: 0 (0%) |
If you're at a stoplight and you need to take off but the car just doesn't want to go into 1st here is what you can do. If it won't go into 1st gear don't shove it in to gear because you could really mess things up. When it doesn't go in just hold the shifter right there and don't move it back at all,just release the clutch a little and it will slide right in. Same thing goes for reverse as well. It works for me everytime. Reverse will still grind going in sometimes but it won't be as bad.
This post has been edited by 95STHATCH: Jun 2, 2004 - 2:02 AM |
dustin15brown 7a-fe Tranny Problems!! Jun 1, 2004 - 10:15 PM
moltar Try changing the head-light fluid. Jun 1, 2004 - 10:17 PM
dustin15brown What would the headlight fluid have teh do with it... Jun 1, 2004 - 10:19 PM
Coomer QUOTE (dustin15brown @ Jun 1, 2004 - 8:19 PM) What... Jun 1, 2004 - 11:46 PM
macavely or you can also try reving up to about 1500rpm.. t... Jun 2, 2004 - 2:06 AM
doGGy QUOTE (95STHATCH @ Jun 2, 2004 - 12:00 AM) If you... Jun 2, 2004 - 2:07 AM
Coomer Cool! Thanks for the info guys...I'll try ... Jun 2, 2004 - 2:11 AM
jojobombiest QUOTE (macavely @ Jun 2, 2004 - 12:06 AM) you can ... Jun 2, 2004 - 5:11 AM
dustin15brown Thanks everyone i'll try it today! Jun 2, 2004 - 8:12 AM
Jason Try this.
With your car sitting at a stop, put th... Jun 2, 2004 - 11:00 AM
Coomer Jason, I'll try that later today, but I have a... Jun 2, 2004 - 3:09 PM
Jason Its probably your slave cylinder. Its probably sh... Jun 2, 2004 - 3:30 PM
Justin I usually don't have the first gear problem, b... Jun 2, 2004 - 3:37 PM
Coomer QUOTE (Jason @ Jun 2, 2004 - 1:30 PM) Its probably... Jun 2, 2004 - 3:49 PM
S_C_M I had a similar problem not too long ago. I had a... Jun 2, 2004 - 8:25 PM
Coomer What should I do and look for when inspecting the ... Jun 2, 2004 - 11:41 PM
ghostdog did you try what mac suggested? give it a bit of g... Jun 2, 2004 - 11:56 PM
S_C_M QUOTE (Coomer @ Jun 3, 2004 - 4:41 AM) What should... Jun 3, 2004 - 12:35 AM
bufferdan pennzoil synchromesh gear oil ! Mine was grin... Jun 3, 2004 - 7:25 AM![]() ![]() |
| Lo-Fi Version | Time is now: September 6th, 2025 - 3:48 PM |