Jun 2, 2004 - 7:09 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 3, '04 From Hollywood, MD Currently Offline Reputation: 6 (100%) |
Im on a mission to restoring my car to near factory condition , as far as I can. And Im going to do a few things soon.
Plugs and Wires, and fuel filter, I think I can manage. Can someone help with fuel filter placement and how to install a new one. What other things would help make the car run better and smoother (idle doesnt sound too pretty as seen on the other thread) I'm also very new to cars (can change plugs and wires pretty easily, change oil, gonna change fuel filter soon with your help) My friend is going to help me with brakes soon. How much do timing belt changes usually cost, Im pretty sure I'm due for one of those soon, but i know thats probably the last thing on the list cause its the most expensive. |
![]() |
Jun 3, 2004 - 1:02 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Apr 22, '04 From illinois Currently Offline Reputation: 0 (0%) |
timing belts are just normally changed every certain milage, i can't really think of it, but someone probably knows. Hyp3R, just get a tooth brush, some brake cleaner, or some really strong cleaning agent, and spray the tooth brush. Then you open up the butterfly on your throttle body, and scrub scrub scrub (the inside and the butterfly).
-------------------- ![]() The most important lesson I learned from Karate-Dō Kyōshan – “You can not be what you do not believe you are” |
brianforster tune up (simple things) Jun 2, 2004 - 7:09 PM
slipgun Tell us how many miles you have and it might help ... Jun 2, 2004 - 7:15 PM
LatinKraze Fuel Filter Change But its for a fifth gen. Might ... Jun 2, 2004 - 7:20 PM
brianforster 113k miles Jun 2, 2004 - 7:47 PM
95STHATCH Get a new distributor cap and rotor button. Jun 2, 2004 - 9:03 PM
ghostdog to add to your list:
change your pcv valve
clean ... Jun 2, 2004 - 10:40 PM
Tweek Yea, the cap and rotor definately if you are doing... Jun 2, 2004 - 11:27 PM
hyp3rk1d how do you clean the throttle body?? Jun 3, 2004 - 6:08 AM
brianforster yeah , I dont even know what a PCV valve is so I t... Jun 3, 2004 - 6:25 AM
brianforster how would I know if I needed a timing belt change? Jun 3, 2004 - 6:40 AM
FoREpLayAX where exactly is our pcv valve?....i guess its bou... Jun 3, 2004 - 2:17 PM
hyp3rk1d thanks man.. how much do timing belts run for? Jun 3, 2004 - 3:20 PM
Jason Timing Belts are cheap, installation costs are exp... Jun 3, 2004 - 3:21 PM
hyp3rk1d ok what cleaning agent should i use?? ne suggestio... Jun 3, 2004 - 3:24 PM
spunky393 haha, i actually don't have any other suggesti... Jun 3, 2004 - 5:33 PM
Snarfer Timing belts are cheap and 96+ (I think) you may n... Jun 3, 2004 - 7:28 PM
Jason Boo! Timing belts suck. Jun 3, 2004 - 9:37 PM
jontechie Had all my belts done about a month ago. If your d... Jun 4, 2004 - 2:47 AM
spunky393 you don't need to replace your pvc valve unles... Jun 4, 2004 - 4:40 PM![]() ![]() |
| Lo-Fi Version | Time is now: April 3rd, 2026 - 12:28 AM |