6G Celicas Forums

Welcome Guest ( Log In | Register )

> Audio Installation Impaired, Celica wiring diagram anyone?
post Feb 25, 2003 - 3:56 AM
+Quote Post
Doge



Enthusiast
***
Joined Dec 2, '02
From Portland, Oregon
Currently Offline

Reputation: 0 (0%)




Ok...i just got a kenwood kdc-mp919 and im about to install it. And i figured out that i cant use the factory amp so i have that taken out and am using the harness that plugged into the amp. I've been working for about an hour so all i have are the ground and two power wires hooked up. (black, red, yellow) Thing is...when i turn the car on the deck doesnt turn on. Do i have the wrong wires hooked up or what the hell am i doing wrong? I know i dont have to wire everything to make the deck work...i just want it to turn on so i know i'm getting somewhere. Does anyone possibly have a diagram telling which colors are for what? That would help alot with both this problem and the time consuming process of testing each speaker wire afterwards to see which wire goes to which speakers. So if anyone could help i would love the advice. Thanks alot. Steve-O
 
Start new topic
Replies
post Feb 25, 2003 - 4:10 AM
+Quote Post
forkee



Enthusiast
*****
Joined Nov 13, '02
From So Cal
Currently Offline

Reputation: 3 (100%)




your kenwood deck should have came with a diagram. mine did, if not go to www.kenwoodusa.com and download one for ur particular model. its pretty straightforward. if its not turning on at all once u connect it, make sure u didn't blow the fuse. theres one inside the cabin, and one main one under the hood.


--------------------

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 22nd, 2025 - 2:18 AM