Audio Installation Impaired, Celica wiring diagram anyone? Options

[Doge]

Ok...i just got a kenwood kdc-mp919 and im about to install it. And i figured out that i cant use the factory amp so i have that taken out and am using the harness that plugged into the amp. I've been working for about an hour so all i have are the ground and two power wires hooked up. (black, red, yellow) Thing is...when i turn the car on the deck doesnt turn on. Do i have the wrong wires hooked up or what the hell am i doing wrong? I know i dont have to wire everything to make the deck work...i just want it to turn on so i know i'm getting somewhere. Does anyone possibly have a diagram telling which colors are for what? That would help alot with both this problem and the time consuming process of testing each speaker wire afterwards to see which wire goes to which speakers. So if anyone could help i would love the advice. Thanks alot. Steve-O

[Doge]

QUOTE (AudioFreak @ Feb 25, 2003 - 4:48 AM)

Power Connections Constant 12+ Blue/Yellow Switched 12+ Gray Ground Brown Power Antenna Black/Red and Pink/Blue connect both wires to the radio's remote wire. Illumination Green Speaker Connections Front/Right + Light Green Front/Right - Blue Front / Left + Pink Front / Left - Purple Rear / Right + Red Rear / Right - White Rear / Left + Black Rear / Left - Yellow Please check all of the wires before you make a connection. I am pretty sure these are the right but it never hurts to double check. Just some advice. Next time buy a wiring harness. www.sounddomain.com/shop/item.pl?sku=SCOTA02B&vq_id=none $5 could've saved you a headache.

isnt teh red usually the power...the black the ground...and the yellow the ignition power? i thought that was pretty much the standard...but from what you're saying audiofreak the red and black and yellows go to speakers...are you sure thats how it goes?