My Project: Design my own trunk!, building my own custom box... Options

[Guest_DJMC_Celica_*]

So i was driving home from work...when i could hear my subs sliding torwards the rear of my hatch! This angers me cause it sounds like sh!t. So i had this brilliant idea !

I WILL BUILD MY OWN CUSTOM BOX!
So i have started to gather my materials...that i think i am going to need!
1. Wood
2. Plexy Glass
3. Nails and screws
4. Glue
5. PAINT!
6. Hinges
7. Metal Chain
8. Sand paper
9. Wood Cutter!
10. bandades (i am accident prone)

Anyone got any good ideas as to what i should remember not to do, or what to do!?
I am thinking outside the box, im talking this thing is going to be nutty looking! nothin like you seen before!
"MTV PIMP MY RIDE STYLE!" not so ghetto lookin though!

All the help is appreciated!
Thanks,
DJMC

[playr158]

what i would suggest if you want it to be nice as all get out......get some chicken wire #1 and then shape that into the shape you want it. this will give you infinite flexability in design options.........then go to home dePOT and buy fiberglass mat and cloth and fiberglass resin and hardener......lay that around your chicken wire design and get a nice hard shell..do a few more layers, bondo smooth....primer and paint.. then cut out your sub circles*or you could acount for this in the design and make the circles from the start* and dude that would ROCK....good luck