the swap of the talk, if you have a 98 forget about it Options

[Guest_Matthew_*]

Just so everyone knows.


If you have a 98 and newer celica you will not be able to do the 3s-gte swap. There are binary codes that make the ECU in cars work. Toyota has not released any of the codes for 98 or newer celicas. You can bypass the codes but it will fry the ECU. even if you get a new ECU from somewhere else it will continue to fry. I know this because after a long discussion with a Eric from Jarco inc about me doing the swap and how much and how long it will take he finally asked what year is your celica. I told him 98. then he told me about the codes. Believe if you want to or don't. It's up to you. If someone has done this then let me know so I can ask him about it. I'm just the messenger. That's why I have chosen to purchase a different celica besides the fact that I have an auto and to add the clutch and small brake pedals would mean having to drill into the firewall (which is illegal to drive after that).

[Charlie97L]

QUOTE (NEVERSTOP @ Feb 25, 2003 - 11:21 PM)

let me get this right... ur saying that the 3sgte ecu will not work with the usdm electrical harness that controls the dash in a 98+right? if thats the case then just get the wiring harness for the dash out of a 94-95 celica and wire it in.. that wouldnt be too hard to do I would look into that before you sell your car.. even though if you got an older (say 94-95 celica) it would cost less then what you could sell urs for so that would free up some cash for paint and stuff like that.

you shouldn't even USE the US wiring harness! i don't know why people seem to be confused about this. use the JDM one! lengthen the wires. that's what the "wiring" part of the swap is!