6G Celicas Forums

Welcome Guest ( Log In | Register )

> Adding Lines, Chassis to Door
post Jul 6, 2004 - 3:25 AM
+Quote Post
mr_dude



Enthusiast
***
Joined Feb 16, '04
From San Diego
Currently Offline

Reputation: 0 (0%)




So I'm doing a good quantity of interior LEDs and finally getting around to putting my power lock actuators in.

1. How have you all run your wiring ot the door? Just cut open the existing rubber tube and taped it back up?

2. I have to run 12 constant volts to the lock actuators. Where have you all put the actuators themselves, and gotten the 12v's?


--------------------
user posted image
 
 Start new topic
Replies
post Jul 6, 2004 - 10:17 AM
+Quote Post
Coomer



Administrator
*****
Joined Aug 23, '02
From Seattle, WA
Currently Online

Reputation: 14 (100%)




As far as running wires through the doors goes, I'll let you read the following. Leave it to Romas to figure out everything. biggrin.gif

QUOTE
SlipGun: I spent 3 hours tryna go through the tube
SlipGun: coomers stuck too lol
DoggyDpit: get your self some sort of hard wire
SlipGun: mkay
SlipGun: like coathanger style?
DoggyDpit: somthing like that
DoggyDpit: that it doesnt bend
DoggyDpit: easy
SlipGun: and push from the inside?
DoggyDpit: well, after that bend on the end of that wire
SlipGun: ok
DoggyDpit: the O
DoggyDpit: shape
DoggyDpit: and push that wire throught that rubber
DoggyDpit: from the door side
SlipGun: soo... for that I guess I ahve to take off more then the black panel on the door
DoggyDpit: then you have the other side of that wire sticking in interior
DoggyDpit: yup
DoggyDpit: NO
SlipGun: thats what I thought
SlipGun: no?
DoggyDpit: thennn YES :-)
SlipGun: lol
DoggyDpit: you will need to remove your speaker
SlipGun: OH
SlipGun: so then there is a hole!!
SlipGun: And
SlipGun: OHH
DoggyDpit: yup
SlipGun: Your a geniou
SlipGun: s
DoggyDpit: ha ha
DoggyDpit: nope im not
DoggyDpit: :-)
SlipGun: seriously, I never ever thought of that
DoggyDpit: i just done a lot of things in my life :-)
SlipGun: I saw my speaker and was like wow thats ugly for how good it sounds
SlipGun: and never thoguht about it again
DoggyDpit: BACK TO BASICS
SlipGun: Lol well in my book that still makes you a genious
DoggyDpit: then you have that wire in your interior
SlipGun: yuo yup
DoggyDpit: put the wires that you need to pull throught that O ring on the end of that hard wire
DoggyDpit: and use some electrical isolating tape to hold the wires
DoggyDpit: and pull it back in to doors :-)
DoggyDpit: get it?
SlipGun: sure do!
SlipGun: Thanks so much man!
DoggyDpit: well, good luck, and tell me how it was :-)
SlipGun: I was about to take appart the whole door cause I dint think of the speaker haha
SlipGun: I def will when I gethome from school
DoggyDpit: hahahahah
DoggyDpit: there are 4 screws to remove speaker
DoggyDpit: :-)
SlipGun: thanks dude, I gota run, you saved me! Yeah I even saw that, like I looked at the speaker for a long time, but it never struck me
SlipGun: wow I feel dumb
DoggyDpit: he he :-)
DoggyDpit: well, laterzz
SlipGun: Im gona copy this to coomer
SlipGun: if thats ok with you


And for the power door lock actuators, I installed these myself as well. Mine were the two-wire ones, and I didn't have to run a 12 volt line into each actuator. Do you have the five-wire ones?

Also, here is how mine are mounted:


Attached image(s)
Attached Image
 


--------------------
New Toyota project coming soon...

Posts in this topic
- mr_dude   Adding Lines   Jul 6, 2004 - 3:25 AM
- - Coomer   As far as running wires through the doors goes, I...   Jul 6, 2004 - 10:17 AM
- - shid   Lol, those braces look cooooooool   Jul 6, 2004 - 12:00 PM
- - mr_dude   Coomer you are helpful. Way more helpful than tha...   Jul 6, 2004 - 2:05 PM
- - Coomer   Are the little black boxes relays? Do they have fo...   Jul 6, 2004 - 3:07 PM
- - mr_dude   Relays, bingo. I only need one per door, I believ...   Jul 6, 2004 - 3:24 PM
- - Coomer   Yep, on the actuators, one wire is the unlock wire...   Jul 6, 2004 - 4:07 PM
- - mr_dude   Hey, what'd you use for 12v constant? I assum...   Jul 7, 2004 - 1:31 PM
- - Coomer   QUOTE (mr_dude @ Jul 7, 2004 - 11:31 AM) Hey, what...   Jul 7, 2004 - 1:37 PM
- - mr_dude   What current rating does the fuse have? I just wa...   Jul 7, 2004 - 1:41 PM
- - Coomer   QUOTE (mr_dude @ Jul 7, 2004 - 11:41 AM) What curr...   Jul 7, 2004 - 3:00 PM
- - mr_dude   That's not soon enough, I want confirmation no...   Jul 7, 2004 - 3:14 PM
- - mr_dude   Follow up: After exhaustively trying each line for...   Jul 7, 2004 - 10:43 PM

« Next Oldest · Interior/Audio/Electrical/Wiring · Next Newest »
 

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Switch to: Standard · Switch to: Linear+ · Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

Lo-Fi Version Time is now: March 29th, 2026 - 8:02 AM
Powered By IP.Board © 2026  IPS, Inc.