Adding Lines, Chassis to Door Options

[mr_dude]

So I'm doing a good quantity of interior LEDs and finally getting around to putting my power lock actuators in.

1. How have you all run your wiring ot the door? Just cut open the existing rubber tube and taped it back up?

2. I have to run 12 constant volts to the lock actuators. Where have you all put the actuators themselves, and gotten the 12v's?

[mr_dude]

That's not soon enough, I want confirmation now
Just kidding. You're the most helpful person since Hamburger Helper, and that's just cuz he had "helper" in his name.

I tried it off my dome light (10A) and it worked but the fuse popped.
So I'm guessing 30 is necessary, though if it works with yours on a 15A fuse that'd be nice. Now the fuse box has "Power" and "Door" fuses, 30A each. I'm wondering if these are for power windows and power doors. That'd be real nice. Regardless, I don't know what wires they correspond to so I'm going to have to take apart the dash.

If anyone knows what the aforementioned fuses correspond to or what color the stock power door fuse wires are, I'd be saved much trouble.