Gauge Bezel Installation, What does it entail? Options

[keefer37]

Did a search and also looked at the How-to's. I'm considering getting a carbon fiber gauge bezel from eBay or elsewhere. I am just wondering what the install entails -- what needs to be removed to get at the existing bezel and whether it jsut goes over top over the original like a lot of the dash kits.

[Coomer]

You need to remove your black plastic piece that arches over the stock gauge cluster after you remove the panel that goes around the ignition hole and has the dimmer knob in it. You then can remove the four screws that hold in the gauge cluster, unplug the three harnesses from the back, and then remove the cluster...you then pull off the clear plastic cover, which is held in by screws and little clips, and the bezel will go inside there. I'm almost positive that it just overlays the stock setup. Then everything goes back together. It wouldn't be hard at all.