 Axle removal/installation, a few questions... |
 Jul 28, 2004 - 10:27 PM
|
 
|
 Enthusiast  Joined Feb 19, '04 From austin tx Currently Offline Reputation: 1 (100%)  |
I started taking off my axles today because my CVs were busted. I got the passenger side off fine, but im having some trouble with the divers side. Does the axle just come out, or am i missing something? Ive tried prying it out with no luck. The axle came apart and this is what i have left to pull out.
 Another question is does out tranny have a drain bolt? Alot of fluid came out and i want to replace the gear oil. Thanks --------------------  |
 |
Replies
|
Jul 28, 2004 - 11:35 PM
|
|
 Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
that pic is what ive been dealing with for the past week.
on the tranny there are 2 large bolts...one is for drain and one is for fill. undo them and drain your tranny oil out. then get some type of thick pry bar and keep prying on it from all sides till it pops out. ....it may take a few min before it comes out. if you end up having to buy rebuild axels, dont buy them from any place that sells rebuilds by CCT... ive had nothing but horrible luck with them. i had them orderd 3 times and none of them were right. -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Posts in this topic
mikew04 Axle removal/installation Jul 28, 2004 - 10:27 PM
Hanyo put your car in nuetual and have the other front w... Jul 28, 2004 - 10:38 PM Kwanza26 Looks like you pulled the axle apart... in a sense... Jul 28, 2004 - 11:36 PM lagos after getting 3 messed up axels from autozone (aka... Jul 30, 2004 - 1:32 PM mikew04 Well i already baught axles before i started this ... Jul 30, 2004 - 2:22 PM presure2 try using a old fasioned lug wrench as a pry bar, ... Jul 30, 2004 - 5:22 PM mikew04 That helped when i was taking it out, but theres r... Jul 30, 2004 - 5:38 PM Sev408 take a block of wood, like a 2x4 and put it agains... Jul 31, 2004 - 2:41 AM lagos QUOTE (mikew04 @ Jul 30, 2004 - 12:22 PM) Well i a... Jul 31, 2004 - 7:07 AM
mikew04 Alright thanks for all the help guys, i got it in ... Jul 31, 2004 - 1:37 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 22nd, 2025 - 3:59 AM |