![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Oct 31, '02 From Boise, ID Currently Offline Reputation: 2 (100%) ![]() |
![]() Hey I got in an accident about a week ago. I'm looking at replacing the bumper with the gt-4 bumper, and also picking up the hood. I got a list of parts from the "gt-4 hood and bumper" string, and sent those off to my dealer. He was able to get all but the ususal three parts that I'll get from toyota world. My questions: 1. It doesn't appear that the actual bumber cover is included, the part # listed as gt-4 bumper, 52521-20200 comes up as the retainer, and only comes in at $31.95. I sent him this list of parts: (he was able to get all but the turn signals and the the hood bulge because of the paint code) 53301-20500 (GT-4 Hood) 81510-20750 (Turn Signal) 81520-20750 (Turn Signal) 52611-20150 (Absorber) 52521-20200 (Retainer) 53395-20020 (Hood Seal) 75034-20030 (Rear Hood Vent) 75033-20030 (Rear Hood Vent) 76180-20010 (Hood Bulge) 76190-20010 (Plate Assembly) 53101-20500 (Grill) 53111-20750 (Other Grill) question: What is the part number for the actual hood piece, because it doesn't seem this list has that on there. Also, is there anything needed that isn't included on this list. 2. Is the bumper cover plastic or fiberglass? 3. Is the actual metal bumper included in this list? The piece circled in red is the one in question. Will I need to buy a standard US one, or is it icluded in the above mentioned parts list? ![]() ![]() Thanks for the help! -------------------- ![]() psalm 69 |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Oct 31, '02 From Boise, ID Currently Offline Reputation: 2 (100%) ![]() |
How much work is needed to modify the stock bar? Do you know of anyone who has done this? Its looking a lot cheaper to get a US one and simply make it thinner, but I didn't know how much work was involved.
-------------------- ![]() psalm 69 |
![]() ![]() |
Lo-Fi Version | Time is now: July 22nd, 2025 - 10:51 AM |