6G Celicas Forums

Welcome Guest ( Log In | Register )

> What To Do?, More Car Troubles!
post Aug 16, 2004 - 11:53 AM
+Quote Post
Coomer



Administrator
*****
Joined Aug 23, '02
From Seattle, WA
Currently Offline

Reputation: 14 (100%)




Right now I'm so depressed about my car. frown.gif

A couple weeks ago I found out that in addition to problems with my clutch's hydraulic system and my tranny, I also have some sort of a problem with the valves on the head of my 4A-GE. I hope it's valve lash and can be fixed fairly easily, but I talked to a couple people and they told me that I may need new valves, which would cost more than another head from a AE101 4A-GE. So I dunno what to do about this yet. It can be done after the tranny and hydraulic system is fixed though(once I pay off the additional $600 of debt that I'm in), as it's just a loud clicking noise when the engine is at idle.

So things weren't too bad until yesterday. Yesterday I decided to install a VVT light in one of my vents so that it could act as a shift light sort of thing. I installed it, only to find out that my car isn't hitting VVT, and never has been, as it's always felt the same as it does now! mad.gif I confirmed that I wasn't hitting VVT by unplugging the VVT sensor from the solenoid...the car felt exactly the same. frown.gif

So I figured maybe it was the speed sensor, since I've been hitting fuel cut at 7,600 RPM or so lately, so I pulled out the ECU to test the pin for the speed sensor. Upon pulling out the ECU, I found that NONE of the wires going into the ECU connectors match what they should be from the pinouts, so testing wires and stuff is going to be a nightmare. frown.gif


So I just don't know what to do. My options are:

1. Fix the car's tranny and hydraulic system and sell it to someone locally. Sell all the parts that I've got sitting around(TRD Curren wing, 5 subs, 1 amp, Lotek pillar pod, oil temp/pressure gauges, piping/connectors for a CAI, front '94-'95 extensions, DG side tower bars, fiberglass 10" sub enclosure, window roll-up module, etc.) Then buy an Infiniti G20.

2. Fix the car's four major engine/drivetrain problems, repaint it, and keep it. This route involves spending thousands of dollars, and most likely taking the car up to a shop in Seattle where they'll charge me lots of money to completely re-do the wiring harness, buying tons of parts, etc. frown.gif

I just don't know...I need something to drive though, and every day it's another problem with the Celica. frown.gif


--------------------
New Toyota project coming soon...
 
Start new topic
Replies
post Aug 18, 2004 - 2:21 AM
+Quote Post
97sccelica



Enthusiast
*****
Joined Aug 30, '02
From Anaheim, CA
Currently Offline

Reputation: 0 (0%)




QUOTE (Coomer @ Aug 17, 2004 - 10:08 PM)
So the new fuse didn't help...I still can't hit VVT. frown.gif

So I went back to my mechanic today...he insists that his wiring is completely 100% perfect and there's no way it can be wrong, and says that I must have a defective ECU. rolleyes.gif

defective ECU, hah, im pretty sure if one part doesnt work, then the whole thing wont work

VVT only engages when the speed, oil pressure and RPM's are at the right place right?

are you positive that those sensors are all in working order?

if you can, get a cheap beter car and pull the engine harness so that you can work on it inside and on a table, thats what my friend and i did with his 240z

we checked every single connection in the entire harness

do you have any wiring diagrams that i could maybe look at and possibly give suggestions on what to check?


--------------------
1994 Celica GT4 WRC Edition
@gt4.wrc on Instagram

Posts in this topic
- Coomer   What To Do?   Aug 16, 2004 - 11:53 AM
- - dstrbcelica   as much as i hate to say it coomer, with all your ...   Aug 16, 2004 - 12:36 PM
- - spunky393   mmmmmmmmmmmmmmm................................ G...   Aug 16, 2004 - 1:17 PM
- - Supersprynt   Depends on how much you want this car to work out....   Aug 16, 2004 - 1:19 PM
- - LatinKraze   Sounds like a lot of work. Go for the G20 Bro.   Aug 16, 2004 - 1:23 PM
- - shid   So who wired up your ECU?   Aug 16, 2004 - 1:24 PM
- - jgreening   I agree with Super. Its a matter of how much crap...   Aug 16, 2004 - 1:27 PM
- - ghostdog   QUOTE (Supersprynt @ Aug 16, 2004 - 2:19 PM) Depen...   Aug 16, 2004 - 1:28 PM
- - urbandork   i agree if ur heart is losing faith in the car the...   Aug 16, 2004 - 1:32 PM
- - Coomer   QUOTE (shid @ Aug 16, 2004 - 11:24 AM) So who wire...   Aug 16, 2004 - 1:35 PM
- - Jdog1385   its tough. i have the same problem. I want to do...   Aug 16, 2004 - 1:36 PM
- - Coomer   QUOTE (jgreening @ Aug 16, 2004 - 11:27 AM) How ab...   Aug 16, 2004 - 1:42 PM
- - boosted_K2   keep the celi, take it to a reliable shop, get the...   Aug 16, 2004 - 1:56 PM
- - shid   Drive it down to LA for a months vacation; everyon...   Aug 16, 2004 - 2:24 PM
- - Coomer   There may be hope...I took it to my mechanic on my...   Aug 16, 2004 - 3:43 PM
- - sphinx   QUOTE (shid @ Aug 16, 2004 - 12:24 PM) Drive it do...   Aug 16, 2004 - 3:57 PM
- - o8poa8o   you could just spend the money to get it fixed the...   Aug 16, 2004 - 3:59 PM
- - Coomer   QUOTE (sphinx @ Aug 16, 2004 - 1:57 PM) i'll f...   Aug 16, 2004 - 4:03 PM
- - o8poa8o   i read over my post after i posted it and thought ...   Aug 16, 2004 - 4:16 PM
- - Supersprynt   Option 3 isnt an option since it has the word HATC...   Aug 16, 2004 - 4:48 PM
- - shid   QUOTE (Supersprynt @ Aug 16, 2004 - 9:48 PM) Optio...   Aug 16, 2004 - 4:52 PM
- - o8poa8o   when did anyone say anything about a sentra? but s...   Aug 16, 2004 - 4:54 PM
- - Coomer   QUOTE (Supersprynt @ Aug 16, 2004 - 2:48 PM) Optio...   Aug 16, 2004 - 4:56 PM
- - o8poa8o   just ingore my post im goin to far off topic   Aug 16, 2004 - 4:57 PM
- - Supersprynt   QUOTE (Coomer @ Aug 16, 2004 - 5:56 PM) QUOTE (Sup...   Aug 16, 2004 - 5:30 PM
- - sphinx   QUOTE (Coomer @ Aug 16, 2004 - 2:56 PM) QUOTE (Sup...   Aug 16, 2004 - 5:30 PM
- - sphinx   QUOTE (Supersprynt @ Aug 16, 2004 - 3:30 PM) Me t...   Aug 16, 2004 - 5:31 PM
- - Coomer   QUOTE (Supersprynt @ Aug 16, 2004 - 3:30 PM) QUOTE...   Aug 16, 2004 - 5:40 PM
- - Supersprynt   QUOTE (Coomer @ Aug 16, 2004 - 6:40 PM) QUOTE (Sup...   Aug 16, 2004 - 5:41 PM
- - Fingaz   ^^^^likes a lot   Aug 16, 2004 - 5:42 PM
- - o8poa8o   so you've never used or hit VVTI? whoa then yo...   Aug 16, 2004 - 5:48 PM
- - Pali_playa   yea, ur gonna love ur car alot more when u hit VVT...   Aug 16, 2004 - 7:17 PM
- - lagos   coomer...its time to become a mechanic like the re...   Aug 16, 2004 - 7:32 PM
- - saleeka   QUOTE (Supersprynt @ Aug 16, 2004 - 9:48 PM) Optio...   Aug 17, 2004 - 2:10 AM
- - 97sccelica   QUOTE (sphinx @ Aug 16, 2004 - 12:57 PM) QUOTE (sh...   Aug 17, 2004 - 2:33 AM
- - Magic   You should try to find a reliable engineer for the...   Aug 17, 2004 - 4:06 AM
- - bufferdan   You probably just need a new master or slave cylin...   Aug 17, 2004 - 8:16 AM
- - DamDirtyApes   sell it to someone who appreciates what uv done to...   Aug 17, 2004 - 8:29 AM
- - Coomer   So the new fuse didn't help...I still can...   Aug 18, 2004 - 1:08 AM
- - macavely   go with number one.. save up and get a second car....   Aug 18, 2004 - 1:24 AM
- - Kwanza26   I too will offer the services of our shop (actual ...   Aug 18, 2004 - 1:39 AM
- - hioctane   time for an mr2 turbo Come to the dark side!...   Aug 18, 2004 - 1:39 AM
- - 97sccelica   QUOTE (Coomer @ Aug 17, 2004 - 10:08 PM) So the ne...   Aug 18, 2004 - 2:21 AM
- - 95STHATCH   Defective mechanic is more like it.   Aug 18, 2004 - 5:12 AM
- - Coomer   QUOTE (Kwanza26 @ Aug 17, 2004 - 11:39 PM) I too w...   Aug 18, 2004 - 1:45 PM
- - Coomer   Augh! More problems! A couple days ago I...   Aug 21, 2004 - 3:12 AM
- - tufy   buy it and get a better 6 gen. celica. swap an gt ...   Aug 21, 2004 - 3:44 AM
- - fastgt   coom id say to just just get the wiring re-done , ...   Aug 21, 2004 - 4:38 AM
- - Digndoug   Get a bimmer .. hehehehehe...   Aug 21, 2004 - 11:33 AM
- - Anub1s   Man coom I really do sympathize here. My old S10 t...   Aug 21, 2004 - 12:38 PM
- - Jeremy1210   QUOTE man. You might want to take the car to a pro...   Aug 21, 2004 - 1:34 PM
- - Coomer   OMG! My mechanic is straight-up retarded...   Aug 21, 2004 - 10:08 PM
- - shid   Coom, so you're hitting VVT now?   Aug 21, 2004 - 10:25 PM
- - YellowTwo   QUOTE (shid @ Aug 21, 2004 - 8:25 PM) Coom, so you...   Aug 22, 2004 - 1:42 AM
- - macavely   Coomer have you checked the harness clips.. .. th...   Aug 22, 2004 - 3:13 PM
- - Coomer   QUOTE (macavely @ Aug 22, 2004 - 1:13 PM) Coomer h...   Aug 22, 2004 - 3:21 PM
- - macavely   then you shoold take a weekend with some friends ...   Aug 22, 2004 - 3:27 PM
- - Coomer   QUOTE (macavely @ Aug 22, 2004 - 1:27 PM) then you...   Aug 22, 2004 - 3:41 PM
- - 97Celica   You should get it off of the CRX that Itchy and I ...   Aug 22, 2004 - 3:46 PM
- - Coomer   Woo Hoo! I just found out that the clicking I...   Aug 25, 2004 - 12:01 AM
- - sphinx   I helped. WOOT   Aug 25, 2004 - 12:35 AM
- - funnyboy117   GO COOMER!!   Aug 25, 2004 - 1:40 AM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: January 11th, 2026 - 9:28 AM