 Gen 5 indicators on 94-95 bumper, How to get them to fit |
 Aug 25, 2004 - 4:55 PM
|
 
|
|
Enthusiast Joined Aug 24, '04 From London Currently Offline Reputation: 0 (0%)  |
I've seen on several posts people who have fitted gen 5 front indicators to 94-95 bumpers even though they're a bit smaller. I've bought some, but cant seem to screw them into my bumper, anyone care to mention how they done theirs, someone suggested glueing to me but if my bulb goes, what a pain......
|
 |
Replies
|
Aug 25, 2004 - 5:37 PM
|
|
 Enthusiast  Joined Oct 22, '03 Currently Offline Reputation: 0 (0%) |
I redrilled the new hole. I pulled the tab that holds the screw to the bumper and relocated it, instead of gluing the old bracket to the new. I removed the metal tab and installed it back wards. By installing back wards it moved the hole (where the screw goes) closer to the inside of bumper, therefore aligning the new drilled hole to the metal tab with out cutting or gluing brackets.
|
Posts in this topic
djrob90 Gen 5 indicators on 94-95 bumper Aug 25, 2004 - 4:55 PM
Rjb23 You have to redrill the hole for the screw at an a... Aug 25, 2004 - 5:05 PM Rjb23 You still need to cut off the new bracket, and glu... Aug 25, 2004 - 5:41 PM LatinKraze Dont need too. The moved metal tab pushed the orig... Aug 25, 2004 - 5:42 PM Rjb23 I see what you are saying, its been a while since ... Aug 25, 2004 - 6:14 PM LatinKraze I was too lazy to cut the brackets. I got lucky an... Aug 25, 2004 - 6:37 PM
LatinKraze Pic 1 = New Hole
Pic 2 = Shows Stock brackets on 9... Aug 27, 2004 - 10:08 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 4th, 2025 - 2:18 PM |