 HOW DO I REMOVE THE CENTER CONSOLE?, putting in a TRD quickshifter |
 Aug 25, 2004 - 10:47 PM
|
 
|
 Enthusiast  Joined Aug 18, '04 From NJ Currently Offline Reputation: 1 (100%)  |
hey wats goin on?? i just purchased a 1995 celica gt less than a week ago so i'm kinda new here. my friend asked me if he could test out my car and i let my friend drive it around. he pushed the car like it was his own(rx7) and now something in the shifter assembly is messed up. (ex. somethimes if you try to shift it into the lower gears(2nd, 4th and r) it wont engage and you end up just reving). so my other friend and i try to see wat the problem is and i just end up buying a new quickshifter from trd to hopefully solve the problem. but i need to take out the center console and i cant take out the side panels(the left and right panels connected to the center console) and i was wondering if anybody could help me out!! i'm getting the quickshifter in 2morrow so i need replys asap! thanx alot!!
|
 |
Replies
|
Aug 26, 2004 - 1:46 PM
|
|
||
|
Enthusiast Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) |
Incorrect. See this: Installation of TRD Quickshifter Also, I recommend cutting the plastic piece that Coomer mentioned despite the comments to the article. I did and there were no adverse affects. If you don't, good luck getting the older shifter assembly out. The knee panels have two screws each and they are near the carpet. The amp does not have to be removed for this mod. This post has been edited by jgreening: Aug 26, 2004 - 8:38 PM -------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
||
Posts in this topic
juBz86 HOW DO I REMOVE THE CENTER CONSOLE? Aug 25, 2004 - 10:47 PM
DamDirtyApes i think u have to undo a few screws in the glove b... Aug 25, 2004 - 10:52 PM juBz86 well i just found the how to article and i need to... Aug 25, 2004 - 11:33 PM DamDirtyApes the amp should unscrew from whatever metal its bol... Aug 25, 2004 - 11:49 PM Coomer Also, to remove the knee panels, it requires remov... Aug 26, 2004 - 1:50 PM turboinduction dont wanna sound like a "noobie" but wha... Aug 26, 2004 - 2:18 PM Coomer QUOTE (turboinduction @ Aug 26, 2004 - 12:18 PM) d... Aug 26, 2004 - 3:02 PM turboinduction whew... i almost thought I was a noobie there for ... Aug 26, 2004 - 3:20 PM juBz86 it took me and my sisters boyfriend about an 1.5 h... Aug 26, 2004 - 9:58 PM ShadowFX if im installing the TWM shifter (no frame), i won... Aug 27, 2004 - 6:37 AM blkGT QUOTE (juBz86 @ Aug 25, 2004 - 9:33 PM) well ... Aug 27, 2004 - 7:47 AM
juBz86 chubby little brother wants in on the action so he... Aug 30, 2004 - 12:40 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 28th, 2026 - 2:27 AM |