Sep 2, 2004 - 7:02 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Sep 6, '03 From hudson ,iowa Currently Offline Reputation: 1 (100%) |
ok so i finish up my turbo and prime the turbo and then i go to start car and nothing happens just cranks and doesnt fire , so shecy everthing oner looks good, check to see if i ahev spark and i do theni check for fuel and i can already smell that so thats good, i cant seem to figure it out anybody got any ideas
|
![]() |
Sep 2, 2004 - 10:49 PM
|
|
||
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 12, '02 From Webster Ma. Currently Offline Reputation: 1 (100%) |
clogged injectors? when i had to get my car started the very first time i had to lean it out it was running to rich. then after it was started i richend it and it was fine. proper spark plug gap also? -------------------- |
||
pxcr440 car wont start Sep 2, 2004 - 7:02 PM
Anub1s Did you check all of your ignition? Distributor ca... Sep 2, 2004 - 7:11 PM
pxcr440 yah it getting spark Sep 2, 2004 - 7:39 PM
drnovascotia Ecu codes ?
Missing any grounds ?
coil good ?
T... Sep 2, 2004 - 8:08 PM
vangSTa_celica Gas?...I have seen it happen... Sep 2, 2004 - 8:12 PM
pxcr440 yah its getting gas cuase after you try cranking i... Sep 2, 2004 - 8:17 PM
pxcr440 bump Sep 3, 2004 - 7:40 PM![]() ![]() |
| Lo-Fi Version | Time is now: March 3rd, 2026 - 2:31 PM |