Building a CAI for 5sfe, need help designing Options

[Redline_Racer]

ok this began when my friend bought a AEM cai for his eclipse and god I love that sucking sound, so I am now building my own, using 2 1/4" diameter piping and mandrel bent corners. I am trying to figure what would be better if I ran the pipe down and move my cruise control box to where my stock filter is and run it down to the hole(s) behind my radiator? or go into my wheel fender where my filter is at right now? Of course I would use a sponge kit to keep the water out.

If anyone has attempted this or completed this I would really love your input. I know pxr94 had it done but took it off for his turbo set up.

thanks,
-Brandon

[ssnake86]

yea as i told coomer before the fuse box was a pain. i mounted mine just a little bit higher up, put my piping right under it, and drilled a bolt into the metal area behind the fuse box. i also had to cut the piping in another spot. so i could put it at the right angle to get it down the hole. so its cut in three place.