![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Aug 19, '04 From Maine Currently Offline Reputation: 0 (0%) ![]() |
I own a 1995 Celica ST and now for some reason it randomly doesnt allow me to go into gear, reverse it will grind and i can force it in but it makes some nasty LARGE nocking noises like the tranny wants to jump out of my car, then if it allows it into a forward gear it will make smaller jerks until i rev it and let off the clutch all the way, wtf is wrong with this, its an off and on problem.... i can go a week without it doing this then all of a sudden it just does it and wont stop until i jam it into reverse and then 1st and it stopped clunking
![]() |
![]() |
![]() |
|
![]() Administrator ![]() ![]() ![]() ![]() ![]() Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) ![]() |
It may be your clutch hydraulic system. When I replaced my slave cylinder a couple weeks ago, it fixed my problems grinding when going into reverse, and allows me to go into first much easier. And the slave cylinder was only $35 or so, and isn't hard to replace.
-------------------- New Toyota project coming soon...
|
![]() ![]() |
Lo-Fi Version | Time is now: September 15th, 2025 - 10:33 PM |