Mar 12, 2003 - 9:05 PM
|
|
|
Enthusiast ![]() Joined Dec 1, '02 From Pittsburgh, PA Currently Offline Reputation: 0 (0%) |
Okay, I'm looking to replace the factory stereo in my 99GT and before I went and bought a wiring harness I wanted to make sure the connections were right by looking at the plug configuration. So after much aggravation I FINALLY got to the factory amp and pulled out the wiring harness to see what the plug looks like. The problem is that I've seen a wiring harness for Toyotas 1987-up and it looks NOTHING like the wiring harness I pulled out of the factory amp. Does anyone know if there is a harness that fits my connection? By the way, here's a description of the plug pin alignment. The top row: group of 2, group of 2, plug tab, group of 2, 1 pin. Bottom row: group of 2, group of 6, 1 pin. Thanks for any help!
|
![]() |
Mar 12, 2003 - 11:12 PM
|
|
|
Enthusiast ![]() Joined Dec 1, '02 From Pittsburgh, PA Currently Offline Reputation: 0 (0%) |
I'm looking at the white plug. There are only 2 plugs that I see, the one that comes from the stereo that plugs into the amp and a larger one that plugs into the other end of the amp. The last one is the one( I assume) that is the factory wiring that I need to connect a new head unit to. And yes, it was a challenge to get to this plug.
|
runriot95 Need help finding wiring harness Mar 12, 2003 - 9:05 PM
AudioFreak Are you looking at the blue or white plugs. You n... Mar 12, 2003 - 10:34 PM
AudioFreak Sounds like you got it figured out. Mar 13, 2003 - 4:49 PM
95STCelica i got a wiring harness from this local tire place ... Mar 13, 2003 - 11:10 PM
Neipas09 QUOTE (95STCelica @ Mar 13, 2003 - 9:10 PM) i got ... Mar 14, 2003 - 6:42 AM
runriot95 QUOTE i got a wiring harness from this loca... Mar 14, 2003 - 12:25 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 21st, 2025 - 2:27 PM |