![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Oct 22, '03 Currently Offline Reputation: 0 (0%) ![]() |
I was told by the Smog shop that I was running too lean. They said that I wasnt getting enough air and the Air to Fuel was off by a bit. They said that maybe if I removed the air filter while doing the test it might help for it to breathe better. So I removed it and they ran the test again and the numbers came back 5x worse. I have to get 1.2 reading at the most, with out the filter it ran at 10.0-15.0, and I am currently at 2.08 with the air filter in. They said it might be the Mass Air Flow Sensor. I went to the dealer and they said that my car does not have one. I think it might be my O2 sensor. Can this make my car run lean? I dont want to change them out cuz the previous owner cross threaded the mofos. Where can I start fellas? Any suggestions? Thanks
-Ivan- ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Oct 22, '03 Currently Offline Reputation: 0 (0%) ![]() |
Well, he confirmed it is running rich and not lean. I removed the air filter and it ran even more rich. I put in my air filter and I unplugged an O2 sensor and ran a little better, but not good enough. My CEL light wont come on anymore so I cant pull any codes. He keeps pointing at a certain part on my engine that he says I need to check. It's some sort of electric thinggy next to the stock intake right where the hose to the box connects to the motor. I'll get a pic.
|
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 11:16 AM |