Mar 14, 2003 - 2:09 AM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Mar 9, '03 From Orting, WA Currently Offline Reputation: 0 (0%) |
I heared that getting your engine ported helps alot. What are your comments on this and anyplace you recommend in North Carolina to do this?
|
![]() |
Mar 15, 2003 - 2:44 PM
|
|
||
|
Enthusiast ![]() ![]() ![]() Joined Oct 27, '02 From Barbados Currently Offline Reputation: 0 (0%) |
It can be done, but the money need to do it would be more. If you have taken that choice and do not regret it, then continue. What you might try looking at before you go out and spend alot of money is to see how well the car behave to small mods like: 1) New Filter 2) Wide Open exhaust like Greddy, Apex, HKS, Magnaflow, etc 3) Adjustable Fuel Pressure regulator. 4) Upgraded ignition system using either MSD Digital 6 or Crane Cams HI6TRC (my choice) w/ Nology M80 Profire coil. 5) once you feel that these have done there job, you can continue. 6) You can then go for a port and polish and if possible, proper vavle angles and so one. 7) You migh also want to put in some mild cams like up to 256. Anything after here depends on how your car performs. Try to get as much out NA before going turbo. Remember that is not a bad thing to change your engine to something better like a 4AGE 20v. I personally believe that these engine are to light for the car. I believe tha te 7AFE, 5SFE are well suited for these car since the celis are fairly heavy and need alot to get going. I have driving 4age 20v's and I can say that there are very discusting in normal stop and go traffic or normal lame driving. -------------------- West_Minist
Hydra EMS Dealer & Tuner Subaru ECUFlash Tuner http://www.socob.bb http://xtremeracingtuning.com Viciously Tuned, Driven Hard ![]() |
||
sapperk Engine Ported Mar 14, 2003 - 2:09 AM
Neipas09 P&P your car helps out, not alot, but enough t... Mar 14, 2003 - 3:58 AM
Cody Isn't it expensive to get a port polish? Mar 14, 2003 - 4:01 AM
Neipas09 I think it's like 400-600 dolla! Mar 14, 2003 - 7:49 AM
edo17982 I just done it with my best friend who's a mec... Mar 14, 2003 - 8:32 AM
sapperk I just got a reply from an engine guy who said it... Mar 14, 2003 - 2:48 PM
gtfourmn Sounds like a good deal... go for it but the 15psi... Mar 14, 2003 - 3:22 PM
95STCelica QUOTE (Neipas09 @ Mar 14, 2003 - 1:58 AM) P&P ... Mar 14, 2003 - 3:34 PM
sapperk Ok, heres my philosphy on cars. Yes between the p... Mar 14, 2003 - 4:02 PM
FallenHero Is he going to make you new drive shafts also? Mar 15, 2003 - 12:49 PM
sapperk Why do I need new drive shafts? Explain? Mar 15, 2003 - 1:46 PM
edo17982 You need a new shaft cause your can't take a p... Mar 15, 2003 - 1:56 PM
NEVERSTOP QUOTE Ok, heres my philosphy on cars. Yes between ... Mar 16, 2003 - 12:37 AM
sapperk You just might have enlightened me.... Everything ... Mar 16, 2003 - 12:54 AM
Charlie97L QUOTE (edo17982 @ Mar 15, 2003 - 11:56 AM) You nee... Mar 16, 2003 - 12:58 AM
sapperk See now im getting confused. So what info is righ... Mar 16, 2003 - 1:07 AM
NEVERSTOP QUOTE See now im getting confused. So what info is... Mar 16, 2003 - 1:27 AM
west_minist Neverstop!
If he doesn't want to go turbo... Mar 16, 2003 - 7:01 AM
FallenHero QUOTE (Charlie97L @ Mar 15, 2003 - 10:58 PM) [i me... Mar 16, 2003 - 11:44 PM
NEVERSTOP QUOTE If he doesn't want to go turbocharge rig... Mar 17, 2003 - 12:56 AM![]() ![]() |
| Lo-Fi Version | Time is now: November 21st, 2025 - 4:38 PM |