![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 13, '02 From So Cal Currently Offline Reputation: 3 (100%) ![]() |
just replaced my old t3 with a similar model, because of shaft play and clicking noise. so i drove around for about a week fully stock. had no problems what so ever. so i put on the new turbo, and im getting the clicking noise once again, as well as the same old problems, smoke coming out the back, and extreme oil leaking. none of these problems existed while it was on stock. also its a brand new turbo. if anyone can help me i would really appreciate it. i work 60 hours a week plus go to school 16 hours, so i really need this problem resolved. thanks
-------------------- ![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 30, '02 From San Juan, PR Currently Offline Reputation: 4 (100%) ![]() |
Can you take CLEAR pictures of your drain line, and how you have your feedline connected for me? That way I can tell you what's going on. Also, what oil do you use and what boost controller do you have? If I turned off my Profec B Spec II, the car wouldn't boost but the wastegate would open and I could hear a clicking, clanking noise. I need to know how your stuff is...I'm getting another engine and I don't want to break it also, hehe. We wanna make sure your stuff is good before it breaks on you.
![]() -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: July 29th, 2025 - 9:33 AM |