Got bored yesterday, Custom 10" sub box Options

[NEVERSTOP]

well had this sub and amp borrowed to me for a while and figured I would get around to doing something with em.. made the sub box yesterday and will make the amp one over the next couple of days... so here ya go.. sorry the pics arnt the greatest

diffently would suggest this project to neone that is thinking about it.. SUPER EASY to do

[NEVERSTOP]

well im not really too concerned about the sound of it.. I want just a little over stock.. I personally HATE loud systems

That and I'm gonna get rid of this setup in a few months newayz cus sub and amp isnt even mine

I am working on the amp one right now so will post a couple pics of the process for you guys as I move along with the project tonight.. plan on finishing it all in the next 2 hrs so stay tuned

here is what I have done so far

this is the area my amp will be mounted on



this is the fiberglass backing I have done already







Sorry I didnt take pics of the prepwork.. basically I removed the panel and sprayed it with pam cooking spray. I then covered it with aluminim foil, paying close attention to the areas that would become the edge of my box. I extended the foil 8 inches past the areas I wanted to end the fiberglass. I used masking tape to help hold stuff down. once the area was completly covered I started laying down the fiberglass.. being carefull to get all airpockets worked out and that it had a nice tight fit on the areas that will become the edges. I then let that cure fully and popped out the fiberglass piece. I didnt glass in the center on this one cuz its the amp one and I wanted to have access to the wires etc once the whole thing was finished but if this was a sub box I would of made it a solid piece. Once it was out I peeled off all the tape and aluinim foil and cleaned everything up.

will post more pics in a little bit