![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 25, '02 From Pittsburgh/Clairton, PA Currently Offline Reputation: 1 (100%) ![]() |
there use to be a list of all parts used for the 3S Swap, where did it go?
there in reality should be about 3 lists complete, then several unknown ones the 2nd gen 3S w/ 5S tranny should be a known the 2nd gen MR2 2S w/ 5S Tranny should be known and either of those w/ the e153 tranny should be known just wanted to further my knowledge what what if kept at the flywheel. 3S pressure plate, 5S clutch?...yea -------------------- ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 10, '03 From Connecticut Currently Offline Reputation: 11 (100%) ![]() |
Mina is also using an E153 w/LSD.
I am unsure of the aftermarket LSD systems as they are few and far between. It would probably be cheaper to buy an entire tranny than to buy the TRD one and put it in. Theres a Curren 3sge tranny up for sale and if you do some research and/or he has the axles you can use that. I am unsure of the compatibility between that transmission and the S54 transaxles. -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: July 29th, 2025 - 11:51 AM |