Oct 19, 2004 - 2:50 PM
|
|
|
Enthusiast ![]() ![]() Joined Nov 17, '03 From New York Currently Offline Reputation: 1 (100%) |
I lowered my Celica with KYB GR2 gas struts and coil-overs...I only have 16's so i lowered the car as far down as possible...After driving the car for a while i have been running into problems, my axle keeps breaking and my mechanic said cause it's too low. So i raised it up and it's fine, do they make shorter axles or is there anything i can do? THANKS-
|
![]() |
Oct 22, 2004 - 11:25 PM
|
|
|
Enthusiast ![]() ![]() Joined Nov 17, '03 From New York Currently Offline Reputation: 1 (100%) |
I have stock brake setup just better pads. I do not beat the crap out of them, i'll get on it but i dont do burn outs and stuff. Last time my axle went i was going the speed limit, 55, on my way home from work. I went around a little bend and then out of no where my car reved up cause my axle went. It's my passenger side that usually goes, which is not the drive axle. And i have a camber kit. ???????? maybe i just have bad luck.
|
TRD6GC Upgraded front axles on a GT Oct 19, 2004 - 2:50 PM
Junior you can't use a different size axle. The prob... Oct 19, 2004 - 11:55 PM
Redline_Racer My mechanic broke my front right axle and bought m... Oct 20, 2004 - 1:02 AM
creis i droped mine 4 inches, and there is no problem wi... Oct 20, 2004 - 2:35 AM
Punch my car is droped 3inches I broke both axles one af... Oct 23, 2004 - 10:42 AM![]() ![]() |
| Lo-Fi Version | Time is now: March 22nd, 2026 - 10:28 AM |