 Just curious..., removing rear lights |
 Mar 19, 2003 - 8:19 AM
|
 
|
|
Enthusiast  Joined Nov 20, '02 Currently Offline Reputation: 1 (100%)  |
Does toyota have a special tool that fits in those small holes to remove the rear lights instead of taking the whole rear apart? I broke the small corner snap when I removed the rear plastic panel.
 I was able to get the lights out and replaced the bulbs though.
|
 |
Replies
|
Mar 20, 2003 - 4:01 PM
|
|
 Enthusiast Joined Oct 25, '02 From London- England Currently Offline Reputation: 0 (0%) |
You should't have to remove the rear plastic panel. The corners at the back have off memory 3 or 4 large round
plastic covers with bulb symbols on them. Its just a matter of twisting them off, this will reveal a hole where you can push a deep socket head( as pressure 2 says) inside to loosen the nuts which hold the rear light assemblies. By the way if you try to take the plastic clips off in the future (the one you broke) remember you have to press the center part of the clip in with a screwdriver and then pull out the outer part of the clip. |
Posts in this topic
Tenchi Just curious... Mar 19, 2003 - 8:19 AM
presure2 i just used a deep socket to get the nuts off then... Mar 19, 2003 - 9:36 AM macavely you could do what i did for a while i just took th... Mar 20, 2003 - 3:43 AM ashleyzredcelica you should be able to buy them...if not then you s... Mar 20, 2003 - 12:46 PM
95STCelica I didnt know that all you had to do was push in th... Mar 20, 2003 - 8:58 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 17th, 2026 - 7:14 PM |