Upgrading my ST205 Options

[spewie]

Hey there everybody,

I have been a member for not too long of this forum and since I am working on quite some modifications to my car, I figured I would make a thread and show you guys what the hell is up with my car.

Here is the list of mods that are going to be done to my car:

- Garret T-28 custom turbo kit
- 850cc injectors
- Fuel pump
- Custom made cat-replacing downpipe
- Blitz Nur Spec R exhaust
- AVC-R boostcontroller
- Rotora breaks front
- Tein suspension with EDFC
- C-One frontbumper
- C-One sideskirts
- C-One rear lip
- GT-FOUR lifter blocks for wing
- 5zigen Pro Racer GN+ 18" rims
- HKS turbo timer
- Apex'i Exhausht temp. gauge
- Apex'i Oil temp. gauge
- AEM Wideband O2 gauge
- AEM EMS ór Autronic EMS
- Shortshifter

Ofcourse we started with getting rid of the old turbo (that was the start of all this, cos i blew off the wastegate of my stock turbo, that used to run on 1.25bar, which was just a little too much i guess). After removing the old turbo and trying to fit the new turbo, it turned out my aussie downpipe could not be used anymore, so we had make a new one, custom. We also had to replace the intercooler connection piece to the turbo. After all this was done, we could put on the turbo.

[spewie]

In the meantime we were also working on the inside of my car, we put in the turbo timer and the shortshifter:










While we were working my car, Saunta Class came along and dropped off the rims and brakes. Here are some pictures of the rims, and some pictures with the rims with the customized 6 piston rotora breaking kit.








Here are some pictures of a 4 piston version:






Now we still need to put together the turbo on the intercooler etc, then it will probably first go to the spray painter to paint my bodykit and my car and in the meantime we can wait for the computer to come in so we can install that right after.

Ill keep this post updated.