stock amp Options

[eclipse_04a]

ok, the main how to just stops talking about it, but what do i have to do? just get to the wiring, and unplug it? can i wire it up to my new deck? whats the deal? this info should be added to the howto. and where does the second smaller plug go....my wiring harness from the stock deck only has the one larger plug....am i missing something here?

[eclipse_04a]

ok, well i figured it out....took me a LONG time...like 5 hours from beggining to end to put in my new head unit. i took out the seats, back section of the center console, the glove box, the panel under the steering wheel, the plastic covers in the doors... i couldnt get the upper section of the center console out, the HVAC controls are in the way, so i didnt know how, but i just bent it out of the way, hoping it wouldnt break. i removed the amp completely. took out the two wire harnesses, and then plugged the correct wires in to the adapters, and put everything back, ending up with like 6 extra screws, so ill have to find any parts that rattle and fasten them back down better. but all works well.... but for my own knowledge, how do you get the upper console part out. i had no problem with the lower one, and the trim peices....