![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Mar 29, '04 From Manchester, England Currently Offline Reputation: 0 (0%) ![]() |
Had my Apexi Power FC fitted and mapped today. It is running at 1.2bar of boost and holds all the way to the redline. The figures at the FLYWHEEL with an estimated 25% transmission loss are as follows:
332.1bhp@6441rpm 317.7lb/ft Torque @3961rpm Power at the hubs was: 249.1bhp @ 6441rpm 238.3lb/ft @ 3961rpm This post has been edited by mmorg3053: Dec 1, 2004 - 8:05 AM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Nov 16, '04 From UK Currently Offline Reputation: 0 (0%) ![]() |
Nasty dip in the middle of the torque curve mate. Any idea what causes it?
-------------------- JDM ST205
Blitz Spec NUR Exhaust, somewhere over $1000 Needing another one 18000 miles later, bloody annoying. |
![]() ![]() |
Lo-Fi Version | Time is now: June 10th, 2025 - 3:12 PM |