![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Mar 29, '04 From Manchester, England Currently Offline Reputation: 0 (0%) ![]() |
Had my Apexi Power FC fitted and mapped today. It is running at 1.2bar of boost and holds all the way to the redline. The figures at the FLYWHEEL with an estimated 25% transmission loss are as follows:
332.1bhp@6441rpm 317.7lb/ft Torque @3961rpm Power at the hubs was: 249.1bhp @ 6441rpm 238.3lb/ft @ 3961rpm This post has been edited by mmorg3053: Dec 1, 2004 - 8:05 AM |
![]() |
![]() |
|
Enthusiast ![]() Joined Mar 29, '04 From Manchester, England Currently Offline Reputation: 0 (0%) ![]() |
Red is the first run when the boost controller wasnt set up right, and the Apexi SAFC was overfuelling like mad.
Yellow is the 2nd run with the boost controller sorted but the SAFC still overfuelling. Blue is with the SAFC removed and the Power FC fitted and mapped with the boost holding at 1.2. What do you think Lar? Does it look ok to you mate? Cheers |
![]() ![]() |
Lo-Fi Version | Time is now: June 11th, 2025 - 8:12 PM |