![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Mar 29, '04 From Manchester, England Currently Offline Reputation: 0 (0%) ![]() |
Had my Apexi Power FC fitted and mapped today. It is running at 1.2bar of boost and holds all the way to the redline. The figures at the FLYWHEEL with an estimated 25% transmission loss are as follows:
332.1bhp@6441rpm 317.7lb/ft Torque @3961rpm Power at the hubs was: 249.1bhp @ 6441rpm 238.3lb/ft @ 3961rpm This post has been edited by mmorg3053: Dec 1, 2004 - 8:05 AM |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Aug 17, '03 From Bangkok, Thailand. Currently Offline Reputation: 0 (0%) ![]() |
I see...
Honestly, I think you should remapped your Power FC again. 11.0 AFR is a little rich. You still have some horses sleeping around in your engine. Go a little AFR leaner than this.... somewhere around 12 - 12.5. Also, ask your tuner to do something about the glitch on both the Torque and Hp curve between 4000RPM to 5000RPM range. Your boost curve is fine.... . |
![]() ![]() |
Lo-Fi Version | Time is now: June 11th, 2025 - 11:28 PM |