![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Mar 29, '04 From Manchester, England Currently Offline Reputation: 0 (0%) ![]() |
Had my Apexi Power FC fitted and mapped today. It is running at 1.2bar of boost and holds all the way to the redline. The figures at the FLYWHEEL with an estimated 25% transmission loss are as follows:
332.1bhp@6441rpm 317.7lb/ft Torque @3961rpm Power at the hubs was: 249.1bhp @ 6441rpm 238.3lb/ft @ 3961rpm This post has been edited by mmorg3053: Dec 1, 2004 - 8:05 AM |
![]() |
![]() |
|
Enthusiast ![]() Joined Mar 29, '04 From Manchester, England Currently Offline Reputation: 0 (0%) ![]() |
Cheers mate. I will have words about mapping out that dip.. I think that the AFR was as lean as they wanted to take it so I didnt get detonation. Bear in mind that the engine internals are standard, I think the current AFR is safe for the time being.
Have you got any graphs I can look at please? Thanks Mike |
![]() ![]() |
Lo-Fi Version | Time is now: June 11th, 2025 - 7:25 PM |