Dec 4, 2004 - 3:49 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Mar 9, '03 From Orting, WA Currently Offline Reputation: 0 (0%) |
I am going to paint my car by myself but i got some questions.
What kind of paint to use? Ive seen Arcrylic, Enamel, and Latex. I am confused, they are all used on autos, but which is the best, and why? And any advice on how to paint or anything? Yes i am using a airbrush, and i am getting my paint from house of kolor. Any advice on how many coats and how many clear coats? |
![]() |
Dec 4, 2004 - 7:15 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined May 5, '03 From Toronto Currently Offline Reputation: 3 (100%) |
you only have to options in terms of the type of paint. You can use acrylic enamel or base clear. I would go with a base clear, but if you have never painted before, you'll have a difficult time spraying the clear. The prep work has to be perfect, it will make a ****ty paint job look good and a good paint job look excellent. When you rent a booth to paint, try to rent a full down draft booth. It'll be hard to find, if not make sure its semi-down draft. Anything less than semi down will leave you with a ****ty finish. Use an epoxy primer. ****ty primer may have a chemical reaction with the paint and you'll have to repaint the area. Spend the extra money and do it right. 1 or 2 coats of base should give good coverage. When spraying clear, depending on what brand you're using while decide how many coats. I like a deep finish so 4 coats was what I went with. But they were all wet coats. Do some research on the different spray techniques. This is the hard part. Some clears are harder to spray than others. In general the better clears are hard to spray but give the best finish if done right. Watch out for orange peel. Another note about the spray booth is see if you can get an oven baking system.
|
sapperk Painting Car Bymyself Dec 4, 2004 - 3:49 PM
Digndoug haha laytex, thats house apint silly.. This might ... Dec 4, 2004 - 7:32 PM
Supersprynt http://www.diynet.com/diy/ab_auto_body_wor...22786... Dec 4, 2004 - 7:50 PM
Kwanza26 It's all about prep work and having a decent g... Dec 4, 2004 - 8:09 PM
sapperk i have the car primed now with, over the counter p... Dec 4, 2004 - 10:28 PM
Kwanza26 QUOTE(sapperk @ Dec 5, 2004 - 3:28 AM)i have ... Dec 4, 2004 - 11:50 PM
sapperk sounds good, now i just gotta find a place to use ... Dec 5, 2004 - 11:10 AM
pxcr440 if you want black and you are doing a basecoat /... Dec 6, 2004 - 10:01 PM
Junior Do not sand your car down to the metal. Its a was... Dec 6, 2004 - 10:44 PM
flipside97LTD Ditto. He's absolutely right. I do bodywork ... Dec 6, 2004 - 11:36 PM
pxcr440 i was just suggestign that he sand i down cause he... Dec 7, 2004 - 12:18 AM
sapperk i used the duplicolor primer. is it possible to ju... Dec 7, 2004 - 5:17 AM
flipside97LTD This is what you should do: DA the car with 320gri... Dec 7, 2004 - 7:32 AM
celicarocker just go to macco.... $200 and they can paint ... Dec 7, 2004 - 9:30 AM
sapperk hahaha maco Dec 7, 2004 - 12:51 PM![]() ![]() |
| Lo-Fi Version | Time is now: March 26th, 2026 - 8:44 AM |