Axis rims and stock donut Options

[Phr0z3n664]

I got a question my Axis NE-O are on the way, they are 17"x7" but I'm wondering what will I have to do with my stock donut, if I get a flat, I can't ride on the stock donut, the ride would be uneven and will pull, so my question is what size spare could I fit in the spot for my donut, or could a get a donut that will accomodate for the size of my new rims?

[96cel_John]

QUOTE (igotta5S-FEturbo @ Mar 24, 2003 - 10:38 PM)

ok this a very common mistake made by lots of dumasses to be blunt. If you have a flat the donut HAS, MUST, NO DOUBT ABOUT IT, go on one of the back sides. Even if you have a front flat. Take a wheel off the back put it on the front and put the donut on the back. If you put the donut on the front then the halfshaft with the donut will be spinning faster than the regular wheel. That will seriously mess things up, to put it lightly. Or you could get a 5th wheel like mac said. Just like the TV show.

yeah haha, i put my spare on the front right and it popped like 5 minutes later. it was underinflated though.

anyway, where can i get a spare with a tire for really cheap online?