CUSTOM BOXES, trunk subs Options

[playr158]

who has custom boxes that the did their selves outta fiberglass?

how much glass did you use?
how many layers?
what was your cost?
did you buy rings or make them?
did you use wood/mdf at all?
bodyfiller?


This post has been edited by playr158: Dec 7, 2004 - 12:08 AM

[pxcr440]

one for the celica with 2 12's and amp flush in middle , couple for fulsize chevys , cougar and fullsize ford with 4 12's,
1. depends on box more than a gallon
2.lots works good to lay first lay with fleese and sok in resin , then build off that , build layers inside if possible saves alot of time less sanding and can be layer on as thick as you want without losing the shape
3.$20 a gallon for resin plus filler amd i had mdf from other boxes
4. can buy but if you use 10''s home depot has 11'' 3/4 thick disk of wood that work nicely just cut out center, makign them isnt to hard but harder to get good circle "or i just cant cut strait"
5.mdf frame and sides with glass top is what do most the time
6. is a must , i use cheap walmart brand bondo , works good , , if you want pics or more questons ask