 Painting Car Bymyself, Any Sugestions |
 Dec 4, 2004 - 3:49 PM
|
 
|
 Enthusiast  Joined Mar 9, '03 From Orting, WA Currently Offline Reputation: 0 (0%)  |
I am going to paint my car by myself but i got some questions.
What kind of paint to use? Ive seen Arcrylic, Enamel, and Latex. I am confused, they are all used on autos, but which is the best, and why? And any advice on how to paint or anything? Yes i am using a airbrush, and i am getting my paint from house of kolor. Any advice on how many coats and how many clear coats? |
 |
Replies
|
Dec 7, 2004 - 7:32 AM
|
|
 Enthusiast Joined Nov 29, '03 From Hampton, VA Currently Offline Reputation: 0 (0%) |
This is what you should do: DA the car with 320grit. Then reprime it with a 2 part urethane primer. I used Omni brand 2K primer (ppg). 2 coats of that and you'll be straight as far as priming it goes. Before you do anything though, make sure there are nooooo sanding scratches in the work. If the last grit of sandpaper you used was 80 or 36 grit, you do have scratches. In that case sand them out with 180, or use a primer that can fill em like pxr440 said. At any rate finish of with 320 before you reprime.
--------------------  |
Posts in this topic
sapperk Painting Car Bymyself Dec 4, 2004 - 3:49 PM
Junior you only have to options in terms of the type of p... Dec 4, 2004 - 7:15 PM Digndoug haha laytex, thats house apint silly.. This might ... Dec 4, 2004 - 7:32 PM Supersprynt http://www.diynet.com/diy/ab_auto_body_wor...22786... Dec 4, 2004 - 7:50 PM Kwanza26 It's all about prep work and having a decent g... Dec 4, 2004 - 8:09 PM sapperk i have the car primed now with, over the counter p... Dec 4, 2004 - 10:28 PM
Kwanza26 QUOTE(sapperk @ Dec 5, 2004 - 3:28 AM)i have ... Dec 4, 2004 - 11:50 PM sapperk sounds good, now i just gotta find a place to use ... Dec 5, 2004 - 11:10 AM pxcr440 if you want black and you are doing a basecoat /... Dec 6, 2004 - 10:01 PM Junior Do not sand your car down to the metal. Its a was... Dec 6, 2004 - 10:44 PM flipside97LTD Ditto. He's absolutely right. I do bodywork ... Dec 6, 2004 - 11:36 PM pxcr440 i was just suggestign that he sand i down cause he... Dec 7, 2004 - 12:18 AM sapperk i used the duplicolor primer. is it possible to ju... Dec 7, 2004 - 5:17 AM celicarocker just go to macco.... $200 and they can paint ... Dec 7, 2004 - 9:30 AM sapperk hahaha maco Dec 7, 2004 - 12:51 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: March 26th, 2026 - 8:44 AM |