![]() |
![]() |
![]() |
|
Enthusiast Joined Dec 6, '04 From J17 M6 UK Currently Offline Reputation: 0 (0%) ![]() |
After reading the now closed "body roll" topic I just want to add that I can make my 94 SSII JDM 2.0 Celica (3sge) drift around a round-a-bout (these simplify big junctions in the uk)...
I was doing about 20mph driving like miss daisy in third gear barely touching the acceleration and my back end came right out whilst on a 2/3 lock of the wheel to the right.... It came out so bad I drifted the last 1/3 of the round-a-bout off to my exit... very cool and extremely scary....any doubters and I will take you for a spin myself (if you live near of course) and er prove it... Any I was defo driving carefully because the missis was in the car... I have had the front shocks changed and the anti roll bar bushes since, also waiting for the cv joints to be changed,.. I can still make it do it but have to work harder now. just for the record. Cheers J |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Jul 19, '04 From Strongsville, Ohio Currently Offline Reputation: 0 (0%) ![]() |
Dude...simple just slap some coil over's and front n' rear srut bars....slam your car to the ground...I slammed mine 4 inches but no aftermarket srut bars...Dropping it really improves the handling...taking corner's at higher speeds....mmmm lol =)
~doggy...good luck with your drifting...i bet you'll slam into something because when you turn...that's if you turn you'll just slide....The lil blizzard thing we just had the other day in Ohio I went to turn but turning was not an option...I found it very usefull to drift every turn so that I could make it completely... This post has been edited by pimpstarr690: Dec 15, 2004 - 3:11 PM -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: July 25th, 2025 - 3:15 PM |