![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Jul 12, '03 From Chatham, Ont Currently Offline Reputation: 0 (0%) ![]() |
Well after about a month of shopping messing around and problems I finally have my whole WC setup running!
CPU Idle Temp ![]() GPU Idle temp ![]() GPU Load temp ![]() Im pretty happy with the temps, they seem to be lower then alot of the temps I read about. I know the on board thermal probes differ from actual temps so if someone wants to translate the above temps for me that would be cool. Bleeding the lines ![]() Maze4 CPU block ![]() Moment of truth, my comp still works after tearing it apart!!! ![]() Side shot ![]() The external box, having no shroud really circulates the are keeping it cold in the box, so my pump stays cool aswell as the rad and lines. ![]() Tomorrow I need to run over and get a plug for my t-line, then I can actually close it all up. Noise is a little higher then Id like, Ill try and do something about that in the coming weeks. I know its out of the ordinary to go through the side but I dont have the tools to cut through thick steel, and yes my case has some really thick sturdy steel, so I just cut through the plastic side vent. Any questions or suggestions are welcome, Im sure Ive missed something. |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Dec 4, '03 Currently Offline Reputation: 0 (0%) ![]() |
sorry 1 more post
uppity did you have to cut the screw from your GPU cooler because it was hitting your NB passive cooler. Cause i had to cut mine then bend the last fin outward some so they did not touch. -------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Jul 12, '03 From Chatham, Ont Currently Offline Reputation: 0 (0%) ![]() |
QUOTE(Sev408 @ Dec 18, 2004 - 11:58 AM) sorry 1 more post uppity did you have to cut the screw from your GPU cooler because it was hitting your NB passive cooler. Cause i had to cut mine then bend the last fin outward some so they did not touch. [right][snapback]223305[/snapback][/right] No actually I didnt, it is pretty close though, it looks like we have similar mobos if not the same. I think its the difference in the video cards, mine sits a little farther forward. Oh and I overclocked my cpu to 3.01 so far and my vga to 575/575. I have to look up numbers for the vga because it seems ram can be turned up pretty high! few final shots: My whole setup ![]() All together and done ![]() Now for my next project, find me a laptop!......Cheap! haha |
![]() ![]() |
Lo-Fi Version | Time is now: August 3rd, 2025 - 5:29 PM |