 Auto to manual swap day 1 |
 Dec 18, 2004 - 2:31 PM
|
 
|
 Enthusiast  Joined Feb 8, '04 From KY Currently Offline Reputation: 0 (0%)  |
Well day one is starting today I hope to be done by monday. Can't wait I hate auto's!
|
 |
Replies
|
Dec 23, 2004 - 6:49 AM
|
|
|
Enthusiast Joined Feb 8, '04 From KY Currently Offline Reputation: 0 (0%) |
Yeah I got the tranny for $200, the clutch kit was $150 and most of the shifter parts, pedals and such were $100 and the flywheel was $30, the ECu was $75(which I haven't used yet), and misc stuff was $80(like shifht nob, bolts, oil, getting the flywheel turned).
Gas, you should have no problem doing it, its basically just like taking out a transmission and putting a new one in, the inside stuff is the only thing that you have to do different. That took a few hours putting in the pedals is the hardest part because of the angle, its kinda hard to get to. |
Posts in this topic
Rjb23 Auto to manual swap day 1 Dec 18, 2004 - 2:31 PM
LatinKraze Pics? Dec 18, 2004 - 3:21 PM Akimbo Was really hoping someone would do it for a GT. Dec 18, 2004 - 3:28 PM Rjb23 Sorry not pics no digital camera, in 4 hours we go... Dec 19, 2004 - 4:49 AM Sev408 QUOTE(Rjb23 @ Dec 18, 2004 - 2:31 PM)Well day... Dec 19, 2004 - 2:34 PM Rjb23 Hey sev, did all the plugs just match up to the ma... Dec 19, 2004 - 10:11 PM Sev408 ummm yes and no
obviously the main harness plug h... Dec 20, 2004 - 3:06 AM Rjb23 Ok, today I found the replacment main seal and eve... Dec 21, 2004 - 5:51 AM Rjb23 Well finished up today and so far so good. It is v... Dec 22, 2004 - 6:36 AM ummmx2 so how much the total run you? Dec 22, 2004 - 12:07 PM dahoman9 hey, where in KY are you? I'm in Crestwood ri... Dec 22, 2004 - 12:19 PM Rjb23 Total it cost about $650 for all the parts.
... Dec 22, 2004 - 6:19 PM hellsyphon are you going to do a write up or is it basically ... Dec 22, 2004 - 7:03 PM Rjb23 Na no write up, his was pretty much spot on, the o... Dec 22, 2004 - 8:28 PM Exile04 it only cost 650 for the tranny and everything wow... Dec 23, 2004 - 3:22 AM gas65 Now that your done, drive down and do mine for me. Dec 23, 2004 - 6:23 AM
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: March 26th, 2026 - 12:56 PM |