Bodykit Install Question Options

[Hart1583]

Well, I got the invader kit. The backbumper fit good, the sides fit great......and the front, no good. The highbeam holes are like an inch-1inch 1/2 out. Im thinking that metal saftey bar is getting in the way, yes I saw the post below about the guy modifying it. My bodykit guy says if thats the problem, we are going 2 remove it but replace it with a metal bar to hold some stability.

So my question, for the kit to fit great, does the bar have to be removed/modified...r did I get a junk front end?

[Junior]

actually, the aluminum crash bar isn't the problem. there are 2 black brackets on the end. Remove those and it'll fit better. But you'll still probably have a gap by the head lights.

[madmods]

actually, the aluminum crash bar isn't the problem.  there are 2 black brackets on the end.  Remove those and it'll fit better.  But you'll still probably have a gap by the head lights.
[right][snapback]232994[/snapback][/right]

I had the same problem in the new front end i made. I used a invader top, and it was a cheap copy, both headlights were not equal as far as the fiberglass going to them. I had to add some. I also removed those 2 black brackets. Your not the first, and you wont be the last!