 7agze vs. 7agte, engine |
 Jan 14, 2005 - 3:17 PM
|
 
|
 Enthusiast  Joined Jan 14, '05 From Miramar, Florida Currently Offline Reputation: 0 (0%)  |
What would be a better head swap for a 7a block gte or gze set up according to performance and cost wise.
|
 |
Replies
|
Jan 14, 2005 - 4:05 PM
|
|
 Enthusiast Joined Dec 27, '03 From Nor Cal Currently Offline Reputation: 0 (0%) |
To say a bit more... the supercharged set-up will be easier... you basically adapt the GZE set-up... but it has limits. The S12 supercharger isn't all that and its peak performance is only about 12 psi... after that, it gets really inefficient. A turbo set-up is a bit more complex. There's some custom stuff involved along with more tuning and maintence needs. It has much better power potential depending on the turbo. Regardless... I hope you're aware of the wiring requirements of a 7AG hybrid. If you have the skills or the money to do it... go for it. If not, back to the drawing board...
Oh... and the 7A's weak spot is the rods. Gotta do something about those rods if you plan on big power. This post has been edited by Kwanza26: Jan 14, 2005 - 4:06 PM -------------------- "It's ok to be naked girl... I'm an artist!"
1995 AT200 Celica ST: stocked out daily driver... 1984 AE86 Corolla GT-SR5: silvertop 20V 4AGE project car jacked up with goodies... 1991 SW2x MR2 n/a: bare bones hardtop model soon to be... |
Posts in this topic
Ethnykceli 7agze vs. 7agte Jan 14, 2005 - 3:17 PM
nik you mean the head off a 4agze (supercharger) or th... Jan 14, 2005 - 3:21 PM Kwanza26 It's the old supercharged vs. turbocharged que... Jan 14, 2005 - 3:42 PM thedevilmaycrie id say be original and go super everyone else is t... Jan 14, 2005 - 3:48 PM nik or you can do this
swap a 4agze if you want super... Jan 14, 2005 - 4:02 PM Hanyo Hey Kwanza,
Doesnt the stock 7afe block only handl... Jan 14, 2005 - 8:26 PM
Kwanza26 QUOTE(Hanyo @ Jan 15, 2005 - 1:26 AM)Hey Kwan... Jan 14, 2005 - 9:44 PM Hanyo can the stock 7afe block handle the 12 psi the sc1... Jan 15, 2005 - 1:44 AM Kwanza26 QUOTE(Hanyo @ Jan 15, 2005 - 6:44 AM)can the ... Jan 15, 2005 - 3:54 AM Digndoug To bring a half dead topic up. so you could use, a... Jan 25, 2005 - 4:21 PM nik QUOTE(Digndoug @ Jan 25, 2005 - 2:21 PM)To br... Jan 25, 2005 - 5:39 PM Mysticalchaos late responce...
but yes the rods will be weak if... Nov 8, 2006 - 2:36 PM nik QUOTE(Mysticalchaos @ Nov 8, 2006 - 1... Nov 8, 2006 - 3:09 PM trd94 so what was done with the piston issue you had i w... Nov 8, 2006 - 5:49 PM nik QUOTE(trd94 @ Nov 8, 2006 - 4:49 PM)... Nov 9, 2006 - 3:11 PM trd94 so how much did that cost to have done Nov 9, 2006 - 6:46 PM nik QUOTE(trd94 @ Nov 9, 2006 - 5:46 PM)... Nov 9, 2006 - 8:01 PM trd94 that is not a bad price for custom pistons & r... Nov 10, 2006 - 6:06 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 9th, 2025 - 5:18 PM |