 how to change brake pads |
 Jan 14, 2005 - 5:13 PM
|
 
|
|
Enthusiast  Joined Mar 20, '04 Currently Offline Reputation: 3 (100%)  |
Hey guys I think i need to change my brakes soon. I step on the brakes and it takes a while to stop now. Just want to know what I have to do and how hard and what tools I need for this job. Thanks in advance.
|
 |
Replies
|
Jan 14, 2005 - 5:35 PM
|
|
 Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
ok here is how to do it
1) get a jack, 2 jackstands, and a set of sprockets 2)remove wheel sit to the side 3)remove caliper (there are TWO bolts holding on the skinny metal piece that goes around the caliper 4)take the caliper off it was either the same bolts from step 3 or another 2 i actually have a full picture thing just not on this compu 5) pull off the brake pads push them into the caliper and they fall off... 6) take off the lil wire things attached to them 7) replace with new pads and shims (shims are the lil metal things behind each pad 8) compress caliper piston with anything i used a clamp put your pads with anti squeel grease back in and redo the steps |
Posts in this topic
celicaboston1983 how to change brake pads Jan 14, 2005 - 5:13 PM
celicaboston1983 do you have any pics Jan 14, 2005 - 10:11 PM rjbibeau dude just do it it's easy.... i mean if you ca... Jan 16, 2005 - 1:32 AM
shid QUOTE(rjbibeau @ Jan 16, 2005 - 6:32 AM)dude ... Jan 16, 2005 - 1:49 AM celicaboston1983 QUOTE(shid @ Jan 16, 2005 - 6:49 AM)QUOTE(rjb... Jan 16, 2005 - 12:16 PM mr_dude QUOTEdude just do it it's easy....
It's n... Jan 16, 2005 - 1:47 AM rjbibeau i'm not being an ass but why your never gonna ... Jan 16, 2005 - 2:24 AM wind heres some advice...
get a car repair manual for ... Jan 16, 2005 - 7:38 PM celicaboston1983 Yea I think I will get a manual I went to autozone... Jan 16, 2005 - 9:12 PM wind go to amazon.com.... thats how i got mine
http://... Jan 16, 2005 - 10:28 PM Andason no no no, you all have it wrong, there is one bolt... Jan 17, 2005 - 12:04 AM wind you are right.... but you need to get a slimmer wr... Jan 17, 2005 - 1:45 AM Digndoug HaHa Iv been doing break jobs sence i was 12.. dam... Jan 18, 2005 - 1:36 PM Consynx i do not suggest Speedycarparts.com
not 1 bit... Jan 18, 2005 - 2:06 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 18th, 2025 - 9:54 AM |