i need to replace my valve seals, has anyone done this firsthand?? Options

[forkee]

k so i thought it was my turbo's fault the first time i was burning oil cuz when i took it off and ran stock, i didnt get any smoke. after getting the turbo rebuilt, it fixed the oil leak problem, but it was smoking again. turns out the added pressure is letting oil get past the seals onto the stems and burning out the back. and its really bad too. i added some "no smoke + stop leak" stuff, and it helps on the low end, but when i really punch it, i still get A LOT of smoke. i mean it clears the freeway about 50 feet behind me.

so my question is, has anyone replaced theirs or gotten it replaced?? i need to get this done asap because its really starting to bug me. plus its deterring me from boosting because i can never go full throttle. if anyone has had this done, how much did it cost for either DIY or for a mechanic to do it, what parts will i need, and where can i find those parts.

thank you

[playr158]

eric your pic won't help you don't have 7afe he needs that cause your engine is just confusing