![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jul 16, '04 From Los Angeles Currently Offline Reputation: 8 (100%) ![]() |
So i put in ebach sport lines the other day. On the instuctions that it came with it says that the springs f and r (front and rear) and that the springs have to be put in so that the words are right side up.
I did this to the front springs however on the rear springs they would only go in proper if the words were upside down. With the rear spring witht he words right side up the bottome of the spring is to small for the strut perch and the top is to big for the rubber flange and would either slip of, have half on half off, or all of the spring on the metal. However when you flip it over upside down the top which is now the bottom is perfect size for the strut perch and fits in snugly and the botom now the top sits on the rubber thing perfectly. I have the rear in upside down and it drives/rides fine. |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Apr 15, '03 From San Jose, CA, USA Currently Offline Reputation: 1 (100%) ![]() |
There were directions....?
I just put em in the same way the stocks looked.... |
![]() ![]() |
Lo-Fi Version | Time is now: July 27th, 2025 - 10:14 AM |