4A-GZE swap. (Q'S) Options

[Niskyspy]

DONT START YELLING!!! I DID USE THE SEARCH FUNCTION BUT DIDN'T FIND ANY GOOD INFO.

Hello, I am a newbi on this forum and I already have some questoins.
I kinda want to do a swap 4A-GZE or 4A-GE. And I have questions about the swap's.

1) Which engine would you recomend and which one is easyer to swap?
2) What do I need, to do a complete swap? if I use stock tranny.
3) Is it possible to do the wiring on my own? (does the wiring job consists of only lenghtheing the wires?)
4) Is there anything else that I should know.

Thats pretty much it. I did find a lot of people talking about these swaps but none of the threads had a list of parts needed to do the swap.
Thank you very much for any info.

[Kwanza26]

1) Which engine would you recomend and which one is easyer to swap?

Doesn't matter. All basically the same (4A series)... The differences is in the wiring and DLI...

2) What do I need, to do a complete swap? if I use stock tranny.

The engine, all sensors, un-cut wiring harness, distributor, coil/ignitor, ECU, tune up stuff...

3) Is it possible to do the wiring on my own? (does the wiring job consists of only lenghtheing the wires?)

Ask yourself this question. If you are completely inept with wires... well... As for "just lengthening"... no. You need to do quite a bit more than simply lengthening. The dash harness and body harnesses require modification.

4) Is there anything else that I should know.
[right][snapback]236861[/snapback][/right]

Research...