GB: CF License Plate Holders, (Part the License Plate goes on) Options

[Consynx]

I'm going to make a sample picture later tonight, but here's one DoGGy made in the CF Hatch Thread.

These will cost roughly $200, and the method of how they will be made is still to be determined.
it will be about $200 if they are pure CF, but cheaper if they are fiberglass molds w/ CF overlay...

I will give a definate price later in time, but expect to pay about $200


This is just an interest thread
and I shall start the list:

1) ConSynX

[Consynx]

I'm going to have to make this a Hatchback Only item...
i just sat staring at the pictures for a bit, and the coupes back appears different:




edit: notice the top corners, and the slants that the lights make w/ the piece...the coupes would end up having gaps or something.

This post has been edited by Consynx: Jan 24, 2005 - 3:16 PM