7agte HELP, change the title still a collection 7age Options

[nik]

Well there is a lot of good info on here and I just want it in one spot i know kwanza and others have talked about it quite a bit so if you could add to this list that would be great.

Some people with good knowledge
DMC, FROTOU, KWANZA, DOGGY, EDO, FALLENHERO,

2zzge rods length 5.429 (wiseco)
7afe rods length 5.217 ( Pauter)

difference .212

a lot of info here about 4age
http://www.needfulthings.net/ostc/4age.htm

this is an idea have them make a connector 7afe to 4age with MAP
http://www.autosportwiring.com/pages/1/index.htm

7age info
http://www.corollaperformance.com/Mods/Eng...GE.html#rayhall

http://te51levin.superjamie.net/7age/

FROTOU the man with the 7agte
http://www.6gc.net/forums/index.php?showtopic=8586&hl=

good place to ask questions
http://www.club4ag.com/

This post has been edited by nik: Jan 28, 2005 - 12:58 PM

[Kwanza26]

Nik... there is no real advantage in using the MAP 4AGZE ecu over a MAP 4AGE ecu unless you plan on setting up DLI. You can modify the exsisting 7A harness to work, but it's a pretty painstaking task because you basically have to re-pin and rebuild most of the engine harness. The main focus should be the distributor, external coil/ignitor because most everything else is pretty similar. The TPS may be slightly different, but I can't imagine it being too much of a hassle. As far as the MAP sensors go, since you're gonna be rebuilding the harness anyway... get a better MAP sensor for boost. Everything else is pretty straight foreward.