 Fianlly have the ST pics, sorry its been a while |
 Feb 6, 2005 - 4:26 PM
|
 
|
 Enthusiast  Joined Dec 16, '02 From Cincinnati, Ohio Currently Offline Reputation: 0 (0%)  |
First sorry that is has taken so long to do. I have taken the pics on my other ST that does not have the ST sway bars. My fiance has the celica with them. Anyway, as you can see from the pics in my profile, the area where you need to bang is higlighted in red. Pretty much where the bar starts to bend. I'd say about a 3 inches long by 3 inches wide, just to be on the safe side.
Jeremy Also here at imagestation: Sway Bar area to hammer If neither of those work, let me know and I will email them to you. I hope that this helps all you out This post has been edited by Jeremy1210: Feb 6, 2005 - 4:31 PM |
 |
Replies
|
Feb 7, 2005 - 1:31 PM
|
|
|
Enthusiast Joined Dec 16, '02 From Cincinnati, Ohio Currently Offline Reputation: 0 (0%) |
i didn't hammer persay. I had to use a pry bar underneath my Susp Sway bar to bend it. I then used a lot of Marine Lithium grease to lube up everything.
If you are getting some squeaking, it could be be hte bushings if they are not lubed. I had to remove mine and relube them to stop. Jeremy |
Posts in this topic
Jeremy1210 Fianlly have the ST pics Feb 6, 2005 - 4:26 PM
jgreening Thanks Jeremy. Thats exactly where mine rub as we... Feb 6, 2005 - 11:16 PM Supersprynt You used imagestation, and its not showing me pics... Feb 7, 2005 - 5:01 PM jgreening QUOTEI had to use a pry bar underneath my Susp Swa... Feb 7, 2005 - 6:52 PM
Jeremy1210 No, I didn't try benidn hte bar. I think that ... Feb 8, 2005 - 1:09 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 21st, 2025 - 10:17 AM |