![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Dec 5, '02 From West Virginia Currently Offline Reputation: 1 (100%) ![]() |
I need someone who knows about the 3stge swap i have tons of ?'s and the search button is just makin more. pm me with you aol sn thanks
Richard p.s. i found a shop that said 3000 for the motor and installation does that sound about right |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) ![]() |
Bryan "no shoes" Moore is a long time MR2 enthuisiast who is probably one of the best 3sgte tuners in the nation. He has also done a ton of N/A ---> Turbo swaps in the MR2 including wiring and has very good rates. You will have to ask him if he can do the motor mounts for the ST and the MR2T tranny conversion but I suspect he could. He also has an excellent reputation.
Here is a brief post he recently made on the MR2 site: I've been working on MR2s since '96 and was one of the first in the country to do the NA->Turbo engine swap in '98. I charge $1300 for a 2nd gen swap, and $1500 for a 3rd gen swap. The customer provides all parts and fluids. That price does include labor for: 1) cleaning, wire brushing of all aluminum, valve cover gasket, timing belt, and clutch replacement on the motor. 2) IN TANK fuel pump swap (ie: Walbro GSS-341) 3) All wiring changes, which are done by pin swaps or soldering. 4) Customer support for the life of the car. Many people on the board do not realize I do mechanical work as well as the EMS tuning, so I wanted to put this out there. Here is his website: Bryan "no shoes" Moore HTH, Jay -------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
![]() ![]() |
Lo-Fi Version | Time is now: September 4th, 2025 - 4:12 PM |