7AFTE DYNO RESULTS, video inside Options

[nik]

can someone make this bigger

and this one

video
all results are with no tuning i didnt have time

well on my last run i turned up to 14 psi but started going lean at 3700 rpm at which point i made 167.3 whp and 205 trq i need bigger injectors this was 1/2 a pull it would have gone into the 200+ range if i had bigger injectors:D

the 2nd run i had a nice 9.5 psi hitting 170 whp and 180 trq

the 1st run at 4.5 psi 126.95 whp and 162.03

i have a few videos but will have to get them up later

This post has been edited by nik: Apr 4, 2005 - 11:30 AM

[easternpiro1]

the nick listed: for teh 7a

things i need
4agze head, wiring harness, and ecu
gze pistons 8.0:1
4age manifold intake (bigger throttle body) i think gotta check again
jgstool 4age manifold for turbo ( i might go custom )
t3 t4 turbo
cam gears
radiator after market
rods ( not sure if i'll use stock or go after market )
i think thats most of the main stuff

im thinking this would be cheaper than getting a 3sgte...but around how much?

[nik]

the nick listed: for teh 7a

things i need
4agze head, wiring harness, and ecu                                                $700
gze pistons 8.0:1                                                                            $200
4age manifold intake (bigger throttle body) i think gotta check again  $75
jgstool 4age manifold for turbo ( i might go custom )                          $250
t3 t4 turbo                                                                                  $300-1000
cam gears                                                                                  $100-400
radiator after market                                                                    $200
rods ( not sure if i'll use stock or go after market )                          $350-700
i think thats most of the main stuff                                  total $2175-3425

im thinking this would be cheaper than getting a 3sgte...but around how much?
[right][snapback]244391[/snapback][/right]

i missed a few parts but 2000-3500 in parts you can get some of this stuff cheaper but then you have labor if you dont do it yourself as for me i'll be doing 90% of the work